As one vehicle that is always used everywhere, it is no wonder if there are some vehicles that always take good care of their cars. Because mobilizing those who don’t get proper treatment will easily be damaged locksmith near you. One of the damages that happened to the car was at the door of the car. If this happens, then all you have to do is use the services of the Locksmith Edinburgh. With proper care, you can get the right treatment.
However, when you are in a hurry and have to open the door of your own car, there are several ways you can use it. Some of the ways referred to here are
1. Provide a variety of tools needed
The tools you need include screwdrivers, brushes and sprayed lubricants. Open the cover panel (door trim) with the glass down. Open the door and handle bolts with a screwdriver plus. Then remove the glass player lever by gouging the pin.
Open the door panel by gouging it using a screwdriver. For cars with a power window, remove the switch. Note the glass strip (weather strip) clean the dirt that sticks with brushes and diesel. Wait to dry. Or clean it with soapy water and after dry clean it with a cloth.
2. Clean the right part
Clean the regulator’s teeth and apply with lubricant. Also motor drive gear for those who use a power window. Also, lubricate the player’s arm and the one there. Pay attention to the outer door openings, check if there is a shift if it is used. If yes, lubricate with spray oil. When spraying, all check by playing the openings of the outer and inner doors.
3. Check the door locking iron rod
Check the section, especially the bottom. If it is rusty or dirty, you must clean it properly. Use lubricants so that the movement is also getting better and is no longer stuck. In this way, you can get a car door that has never been troubled again.